POWER PROTECTION SYSTEMS

We Are GreenPower GP

The effects of surges and lightning-induced over-voltages on Ac power systems are always destructive. AC power protection is often overlooked when deploying electronic equipment causing an annual loss of properties worth billions of dollars.

We have the expertise to prevent this loss to our clients, we offer proactive cutting edge solutions to protect delicate, critical and expensive equipment.

Our power protection solution is categorized into three systems namely

*Automatic Voltage Regulator (AVR)

*Surge and Lightning Protection

*Earthen System

Click for free Consultation

AUTOMATIC VOLTAGE REGULATOR (AVR)

Our series of electrodynamic voltage stabilizers offer reliable and tested economic solutions to inconveniences caused by voltage fluctuation on which we partner IREM (Italy) and Gamatronic (Israel). They are real investments because they will eliminate inconveniency which means a reduction in cost but an increase in productivity. It is only necessary to avoid a few minutes of machine downtime or just one failure to repay the cost of any of our stabilizers.

They are particularly suitable for applications that require:

*High reliability

*Capability to compensate for wide mains voltage variations (both symmetrical up to ±25%, and asymmetrical from -35% to +15%).

*High precision of the stabilized voltage.

*Stabilizing of high power services or with strong inrush current.

*Simple and limited maintenance. etc.

We offer AVR ranges for 1KVA – 500KVA and above

Read Brochure Here

Surge Protection

This is where we protect electronic circuits and equipment from high voltages and surge currents induced by lightning and other forms of transients’ threat to electronic instrumentation and communications networks posed by voltage surges induced by lightning or other causes. we partner Ingesco Spain to deliver the most effective and reliable surge and lightning system the industry can offer. Our Professional Surge Arrestor series offers great value for high-end home equipment and business applications with a vast range of protection solutions for all your system surge protection requirements.

Our surge protection systems can be protected up to tens of thousands of current either transients or induced.

INTERNAL SURGE PROTECTION SYSTEMS

Surge Arrestors and Transient Surges The voltage surges are elevations in voltage that can occur in

electrical distribution, data communications and telephony lines resulting in premature aging of

components and/or damage to the equipment connected to the network.

Overvoltage surges are large spikes have with a slope and are short-lived, yet the strong effects on

sensitive electronic equipment are devastating. The level of the voltage that can appear on the

network is a function of area level (lightning/year• Km), the type of attack, aerial or

underground, and the proximity of the MV / LV transformer. For proper

protection of the equipment against power surges, a system must perform grounding of low ohmic

value and connect equipotential with an external protection system

POWER LINE SURGE PROTECTORS

General protection against lightning and surges of low- voltage on electromechanical facilities. Effective protection of main lines, branch lines, switchboards, and equipment. Three-phase and single-phase protectors, type

1+2 and type 2. Easily replaceable, pluggable and blocking system modules. Base and modules configured for secure mounting. Easy maintenance through local fault locator

“Each year, due to the direct or indirect effects of lightning strikes, property damage occurs, affecting the continuity of service in the public and private sectors. Also, lightning causes injury or serious human deaths worldwide throughout the year, GreenPower Overseas Ltd has the technical capacity with INGESCO lightening technology to help detect, prevent and protect your facility and sensitive equipment from thunderstorm and Thunderstruck”

LIGHTNING PROTECTION SYSTEM

This system is designed to capture the electrical storm using lightning arrestor and channeled it to the ground through down conductors (copper tapes, lightning rod, mast, etc)

The lightning rod is connected to ground with at least two down conductors located on opposite

The down conductors are intended to conduct lightning current from the collection devices to the grounding.

 Accessories Adaptor parts, masts, base plates, and anchoring systems.

 All equipment and parts for lightning protection systems are made by INGESCO (simple tips, multiple and ESE) of Ø16mm or 20mm.

Earthing and Grounding System

The effective earthen system is the basic protection strategy against lightning and neutral failure. Lightning is a fascinating natural phenomenon caused by an electrical current flowing in the atmosphere directly striking equipment or, more usually the building or plant housing it.

The effects of this can be devastating, due to the enormous currents and energies involved. Our job is to ensure that a relatively easy path is provided for the lightning current to flow into the ground without entering your building to cause unwarranted damage. Our expert earthen engineers are on hand to give your buildings and expensive equipment all necessary protection against a lightning strike,

Ground Electrodes are material for building grounding systems. Spike and place grounding electrodes, sacrificial anodes, graphite electrodes, ground resistivity enhancers, and accessories. Made of different materials and dimensions for all kinds of construction solutions.

” Let us help ground your facilities now tomorrow may be too late”

https://www.bestwatchreplicas.co/

POWER PROTECTION SYSTEMS